| Step | | Procedure & Parts & Tools |
| 1 |
|
OPEN TANK TO ACCESS THE POWER BOARD TOWARDS THE REAR OF THE BASE
| Ratchet-Socket metric 13mm |
|
|
| 2 |
|
LOCATE THE SOLUTION PUMP WIRING AT THE POWER BOARD. THE RED PINS ARE FOR PUMP 1, THE GREEN PINS ARE FOR PUMP 2. PROBE EACH PAIR SEPARATELY WHILE ENGAGING THE SOLUTION SYSTEM.
|
| 3 |
|
TO ACTIVATE THE SOLUTION SYSTEM, DROP THE DECK, SET THE SOLUTION LEVEL ON THE DASH, AND ENGAGE THE DRIVE FWD.
|
| 4 |
|
PUMPS RUN ON A PULSED DUTY-CYCLE. THE VOLTAGE WILL NOT BE CONSTANT, IT WILL JUMP UP AND DOWN. THIS PARTICULAR METER HAS A BAR GRAPH THAT WILL MOVE BACK AND FORTH WITH THE PULSE, OTHERS MAY VARY.
| Volt meter (True RMS capable) |
&Width=100)
|
|
|